Step-by-Step Guide to Brother HL 2170W Network Setup for Seamless Printing

Learn how to set up your Brother HL 2170w printer on a network with ease. Connect multiple computers and devices for efficient printing.

If you're looking for a reliable and efficient printer that can be shared among multiple devices, Brother HL 2170W might just be the perfect fit. However, setting up the network connection can be a bit of a challenge, especially if you're not familiar with the technical details. In this article, we'll guide you through the process step by step, so you can enjoy the benefits of wireless printing without any hassle.

Firstly, it's important to understand that the HL 2170W supports both wired and wireless connections, so you can choose the option that works best for your network setup. If you opt for the wireless route, you'll need to make sure that you have a wireless router that supports the IEEE 802.11b/g/n standard, as well as a computer or mobile device that is connected to the same network.

The first step is to connect the printer to a power source and turn it on. Then, press the WPS button on the back of the printer for about 2 seconds until the Wi-Fi light starts flashing. This means that the printer is in the WPS mode, which allows for quick and easy setup with compatible routers.

Next, go to your computer or mobile device and search for available wireless networks. Look for a network name that starts with SETUP. This is the temporary network that the printer creates during the setup process. Select this network and enter the password, which should be 12345678.

Once you're connected to the SETUP network, open up a web browser and type in the IP address of the printer, which should be 192.168.1.1. This will bring you to the printer's web interface, where you can configure the wireless settings.

In the web interface, go to the Network tab and select WLAN. Here, you can choose the wireless network that you want the printer to connect to. You can either select it manually by entering the SSID and encryption type, or you can use the WPS method by pressing the WPS button on your router within 2 minutes.

If you choose to enter the settings manually, make sure to double-check the SSID and encryption type, as well as the password if there is one. Once you've entered the correct information, click Submit and wait for the printer to connect to the network.

After the printer has successfully connected to the wireless network, it's a good idea to test the connection by printing a test page. You can do this by going to the printer's web interface and selecting Print Test Page under the Maintenance tab.

Once you've confirmed that the printer is working correctly, you can go ahead and install the necessary drivers and software on your computer or mobile device. You can download these from the Brother website or use the installation CD that came with the printer.

Overall, setting up the Brother HL 2170W for wireless printing may seem daunting at first, but it's actually quite straightforward if you follow these steps carefully. With its reliable performance and easy connectivity, this printer is an excellent choice for both home and office use.

Introduction

The Brother HL 2170W is a wireless monochrome laser printer that is popular among home and small office users. It provides a high-quality printing experience with its fast printing speed, automatic duplexing, and compact design. One of the unique features of this printer is its wireless capability, which allows users to connect to it without the need for cables. In this article, we will discuss the steps involved in setting up the Brother HL 2170W network.

Step 1: Unboxing and assembling the printer

Before setting up the printer, you need to unbox and assemble it. The Brother HL 2170W comes with a toner cartridge, drum unit, power cord, CD-ROM – drivers, and utilities, and a Quick Setup Guide. Follow the instructions in the Quick Setup Guide to assemble the printer. Make sure to remove all the protective materials from the printer before turning it on.

Step 2: Connect the printer to power

Connect the printer to power using the power cord that came with it. Plug one end of the power cord into the back of the printer and the other end into an electrical outlet.

Step 3: Install the toner cartridge and drum unit

Open the front cover of the printer and install the toner cartridge and drum unit. Follow the instructions in the Quick Setup Guide to do this. Once you have installed them, close the front cover.

Step 4: Install the printer drivers and software

Insert the CD-ROM that came with the printer into your computer’s CD/DVD drive. Follow the instructions on the screen to install the printer drivers and software. If your computer does not have a CD/DVD drive, you can download the drivers and software from Brother’s website.

Step 5: Connect the printer to your Wi-Fi network

Once you have installed the printer drivers and software, connect the printer to your Wi-Fi network. Press the WPS button on your router and then press the WPS button on the printer within two minutes. The printer will automatically connect to your Wi-Fi network.

Step 6: Configure the printer settings

After connecting the printer to your Wi-Fi network, you need to configure the printer settings. Open the printer driver on your computer and click on the ‘Properties’ or ‘Preferences’ button. From there, you can change the printer settings as per your requirement.

Step 7: Test the printer

Once you have configured the printer settings, it’s time to test the printer. Print a test page to make sure that the printer is working correctly.

Troubleshooting common network setup issues

If you are facing issues while setting up the Brother HL 2170W network, here are some troubleshooting tips:

1. Check your Wi-Fi network

Make sure that your Wi-Fi network is working correctly. Check if other devices are connected to the network and if they are working correctly.

2. Check the printer’s Wi-Fi settings

Make sure that the printer’s Wi-Fi settings are correct. Check if the printer is connected to the correct network and if the password is correct.

3. Restart the printer and your computer

Sometimes, restarting the printer and your computer can help resolve network setup issues.

4. Update the printer drivers and software

Make sure that you have installed the latest printer drivers and software. You can download them from Brother’s website.

5. Contact Brother’s customer support

If you are unable to resolve the issue, contact Brother’s customer support for assistance.

Conclusion

Setting up the Brother HL 2170W network is a straightforward process. Follow the steps mentioned in this article to connect the printer to your Wi-Fi network and configure its settings. If you face any issues, refer to the troubleshooting tips mentioned in this article. With its high-quality printing and wireless capability, the Brother HL 2170W is an excellent choice for home and small office users.

Introduction: Brother HL 2170W Network Setup

If you have a Brother HL 2170W printer, setting it up for network connectivity can be a great way to improve productivity. In this guide, we will take you through the steps required to set up your printer for network use.

Gather Necessary Information

Before you start setting up your printer, you will need to gather some critical information about your wireless network. You will need to know the network name (SSID) and security key (password). You can usually find this information on your wireless router or access point.

Connect the Power Cord

The first step in setting up your printer is connecting the power cord. Ensure that the printer is switched off before plugging in the power cord. Then, connect the power cord to the printer and plug it into an electrical outlet.

Turn On the Printer

Once the power cord is connected, turn on the printer by pressing the power button. Wait for the printer to initialize and warm up before proceeding to the next step.

Connect the Printer to the Wireless Network

You can connect your printer to the wireless network in two ways - using WPS or manually. If your wireless router supports WPS, press the WPS button on your router or access point and within two minutes, press the WPS button on the printer. The printer should automatically connect to the wireless network.

Manually Connect the Printer to the Wireless Network

If your wireless router or access point does not support WPS, you can manually connect your printer to the wireless network. Go to the printer's network settings menu and select Wireless Setup Wizard. Follow the on-screen instructions to connect the printer to the wireless network.

Install Printer Drivers

Once the printer is connected to the wireless network, you need to install the printer drivers on your computer. You can find the drivers on the Brother website or use the CD that came with the printer.

Add the Printer to Your Computer

After installing the printer drivers, add the printer to your computer. Go to the Printers and Scanners settings on your computer and select Add a Printer. Follow the on-screen instructions to add the printer.

Test the Printer

Finally, print a test page to ensure that the printer is working correctly. If the test page prints successfully, you have successfully set up the network connection for your Brother HL 2170W printer.

Conclusion

By following the steps outlined in this guide, setting up the network connection for your Brother HL 2170W printer can be a straightforward process. With your printer connected to the wireless network, you can print from multiple devices and increase productivity in your workspace.

Brother HL 2170W Network Setup: Pros and Cons

The Brother HL 2170W Printer

The Brother HL 2170W printer is a monochrome laser printer that is designed to be used in small offices or home offices. It is compact in size, lightweight, and has a printing speed of up to 23 pages per minute. The printer boasts a resolution of 2400 x 600 dpi, which allows for high-quality printouts.

The Brother HL 2170W printer also comes with wireless networking capabilities, allowing users to connect to the printer over a Wi-Fi network. This feature makes it possible for multiple users to access the printer from different locations without having to use cables.

Setting Up the Brother HL 2170W Printer

Setting up the Brother HL 2170W printer for wireless networking is easy. The printer comes with a setup CD that contains all the necessary drivers, software, and instructions to help you set up the printer. Alternatively, you can download the drivers and software from the Brother website.

Once you have the drivers and software installed, you need to connect the printer to your Wi-Fi network. The printer will automatically detect the available networks, and you can select the one you want to connect to. You will then need to enter the password for the network if it is secured.

Pros of Brother HL 2170W Network Setup

1. Wireless networking allows multiple users to access the printer from different locations without having to use cables.
2. The printer is compact in size and lightweight, making it easy to move around and store.
3. The printer has a high printing resolution, which allows for high-quality printouts.

Cons of Brother HL 2170W Network Setup

1. The printer is a monochrome printer, which means it can only print in black and white.
2. The printer's printing speed of 23 pages per minute is relatively slow compared to other printers in its class.
3. The initial cost of the printer may be higher than other printers in its class.

{{Keywords}}

The Brother HL 2170W network setup offers several benefits, including wireless networking capabilities, high printing resolution, and a compact design. However, the printer's slow printing speed and initial cost may be a drawback for some users. It is important to consider these pros and cons before deciding whether the Brother HL 2170W printer is the right fit for your needs.

Closing Message: Brother HL 2170W Network Setup

Congratulations, you have successfully set up your Brother HL 2170W printer on your network! We hope that the information we provided in this article has been helpful and easy to follow.Remember that setting up a network printer can be a bit tricky, but with patience and attention to detail, it is achievable. You don't need to be an IT expert to do it, but you do need to follow the steps carefully.It's essential to keep in mind that every network setup is different, and you may encounter some issues or error messages during the process. Don't panic, take a deep breath, and read the instructions again. It's possible that you missed something or didn't follow a step correctly.If you still can't get your printer to work, don't hesitate to reach out to Brother's customer support team for assistance. They're always happy to help and can guide you through any troubleshooting steps over the phone or via email.Once your printer is set up on the network, you can enjoy the convenience of printing from anywhere in your home or office without the need for cables or wires. It will save you time and make your life easier.Don't forget to update your printer firmware regularly to ensure that it's running smoothly and efficiently. Firmware updates often fix bugs and improve performance, so it's essential to keep your printer up to date.Lastly, we hope that you found this article informative, and if you have any feedback or suggestions, please feel free to leave a comment below. We always appreciate hearing from our readers and strive to provide the best content possible.Thank you for visiting our blog, and we wish you all the best with your newly networked Brother HL 2170W printer!

Brother HL 2170W Network Setup: FAQs

What is Brother HL 2170W?

Brother HL 2170W is a wireless laser printer that allows you to print documents remotely. It is a compact and efficient printer that provides high-quality prints at affordable prices.

How do I set up network connectivity on my Brother HL 2170W printer?

You can set up network connectivity on your Brother HL 2170W printer by following these simple steps:

1. Press the Menu button on your printer.
2. Scroll down and select Network, then press OK.
3. Choose WLAN and click OK.
4. Select Setup Wizard and click OK.
5. Choose your Wi-Fi network and enter the password.
6. Wait for the printer to connect to the network.

Can I connect my Brother HL 2170W printer to multiple devices?

Yes, you can connect your Brother HL 2170W printer to multiple devices over a Wi-Fi network. Once you have connected your printer to the network, you can access it from any device that is also connected to the same network.

How do I find the IP address of my Brother HL 2170W printer?

To find the IP address of your Brother HL 2170W printer, follow these steps:

1. Press the Menu button on your printer.
2. Scroll down and select Network, then press OK.
3. Choose TCP/IP and click OK.
4. Select IP Address and click OK.
5. The IP address of your printer will be displayed on the screen.

How do I troubleshoot network connectivity issues on my Brother HL 2170W printer?

If you are experiencing network connectivity issues with your Brother HL 2170W printer, try these troubleshooting steps:

1. Make sure your printer is turned on and connected to the network.
2. Check that your Wi-Fi network is working properly.
3. Restart your printer and Wi-Fi router.
4. Ensure that your printer's firmware is up to date.
5. Try resetting your printer's network settings and reconnecting it to the network.
6. Contact Brother customer support for further assistance.

By following the above guidelines, you can easily set up and troubleshoot your Brother HL 2170W printer's network connectivity. If you encounter any issues, don't hesitate to seek help from Brother's customer support team.

Location:

Share :